For innovators and hobbyists looking to unleash the full potential of their [...]
Arduino
This classic course will teach you everything you need to know to create Arduino gadgets with sensors, displays, and lights. Start here if you are new to the Arduino.
In this eBook and video course, I have packed almost everything I have learned as a KiCad user and electronics instructor to help you learn KiCad.
Use this video course and eBook to learn Node-RED, Raspberry Pi Pico W, and MicroPython, and add these state-of-the-art tools to your technology toolkit.
Each week we publish a new article on out blog with programming tips, tech reviews, and updates of upcoming books and courses.
Arduino
For innovators and hobbyists looking to unleash the full potential of their [...]
KiCad
I’m excited to introduce you to the latest and greatest version of [...]
Education
Learning anything worth learning from the ground up is hard. The road [...]
Arduino
As a programmer, you are constantly seeking ways to optimize your code [...]
Arduino
In this post, I continue the work I started in last week’s [...]
Electronics
A BLE beacon is a Bluetooth device that broadcasts small amounts of [...]
Arduino
If you want to be able to write Arduino programs that go [...]
News
I’m thrilled to announce that my latest book, Node-RED & Raspberry Pi [...]
I'm training to be a pilot! In these pages I keep a detailed record of my journey and share the ups and downs (literally) with you.
I invite you to join me in my flying adventures!
Training area
Flight log Flight 39: Training area familiarisation My first flight after another long break was, in fact, sightseeing. It was a far cry from the usual laps around the airport. In today’s flight, Greg took me around some of the most important landmarks around Camden (from an aviation point of view). I also performed two […]
Circuits, radio issues
Flight log Hour 35: Solo circuit training I had an internal debate about writing this log, because this flight did not happen. I planned to do a mid-day solo circuit flight (just like for Hour 34), but only managed to taxi to the runup bay before ATC asked me to return to parking due to […]
Circuits, solo
Flight log Hours 34: Solo circuit training door-to-door On Hour 34 of my training, I conducted a full flight as pilot-in-command! We often refer to this flight as “door-to-door”, because the pilot in training completes the entire ground and air components of the flight solo, with the instructor monitoring from a distance. This door-to-door flight […]
advanced, Stalls, training
Flight log Hours 32: Advanced stalls Advanced stalls are stall maneuvers and recovery practices that go beyond the basics taught to beginner pilots. These advanced exercises are designed to enhance a pilot’s understanding and handling skills in more complex stalling scenarios that they might encounter in flight. In Hour 32, I practiced these maneuvers at […]
"Power loss", Circuits, emergencies, Flapless
Flight log Hours 33: Dual circuit training on RW06 and RW28 As it was three weeks since my last flight, a circuits solo was not possible. In today’s second flight, I did dual circuits training with Davide. This session was filled with emergencies and my first landing on Runway 28, which is grass, plus my […]
Basic Intrument Flying, BIF, Simulator
Flight log Hour 31: Simulated for Basic Instrument Flying (BIF) training Today I had hoped to do a door-to-door circuits solo, but the weather, again, did not cooperate. So, Greg suggested I use the simulator to do some Basic Instrument Flying Training. This was a very good alternative to real-world flying, given that BIF is […]
Tech
Explorations
Courses
Our courses are designed to be detailed, comprehensive, and descriptive. Learn new skills that specifically apply to your projects.
You are at the right place. We have some of the best content on the Internet right here, ready to dive in.
The original comprehensive course designed for new Arduino Makers. It will teach you how to use the Arduino and learn about electronics and programming. We designed this course for people just starting now. It's the perfect start for the new Arduino Maker.
Create Arduino gadgets that can communicate, move, interact, measure and detect. This course picks up where Arduino Step by Step Getting Started left off and shows you how to use dozens of external components and advanced build-in features.
Raspberry Pi: Full Stack is a comprehensive project course that will teach you how to build a modern Internet-of-Things application that includes a local web server application written in Python and JavaScript, sensors, buttons and LEDs, and online Cloud services like If This Then That, Google Sheets, Google Charts, and Plotly.
Use this powerful microcontroller to turbo-charge your Arduino projects. If you are already using the Arduino in your projects, then you'll love what the ESP32 can do. This course will help you get up and running with the ESP32 quickly.
Learn Arduino IoT Cloud to create IoT applications based on the Arduino MKR1010, the Arduino Nano 33 IoT, and the ESP32. This course is for anyone wanting to create secure and scalable IoT applications.
Learn the world's favorite open-source PCB design tool with the world's most comprehensive course and eBook. Learn to use KiCad to design multi-layer PCBs with highly integrated components and a professional-looking finish.
Why learn with us?
It's as simple as that.
We have created a calm and supportive online environment for our students where you can focus, think, and learn. It's the opposite of what you'll find on gigantic video sharing and social platforms.
Students come to Tech Explorations because they are serious about learning. We support you through our quality content, interaction with dedicated instructors.
All our courses have their dedicated discussion space. Every lecture has a dedicated questions & answer tool. When you are stuck, we can help.